A dultdating - Bluetooth dating application

The complete code is available at the end of this article in the "download code" button.No extra library is used to connect to the Bluetooth module because the RX and TX pins of the Arduino are shorted with those of the module.

bluetooth dating application-47bluetooth dating application-22bluetooth dating application-50

I assume you have connected your actual Android Mobile device with your computer.

Set; public class Main Activity extends Activity Let's try to run your application.

The Arduino generates a 5 V signal, so you should use a voltage divider or logic-level translator to ensure that the Arduino signal does not damage the HC05.] If you are using the BTBee module with the shield, set the jumpers on the board so that the DOUT pin and D0 pins are shorted and DIN and D1 pins are shorted.

This is done because the RX pin on the Arduino is Pin 0 and the TX pin is Pin 1.

Now that the adapter is enabled, check for paired/bonded devices.

Last modified 25-Apr-2020 06:04